Wireless Prototyping Fundamentals Using NI SDR & LabVIEW: Sept. 19-21, 2016

The Wireless Prototyping Fundamentals course introduces you to rapid prototyping of wireless systems with the LabVIEW Communications System Design Suite. You will learn how to navigate the LabVIEW Communications environment, including the panel, diagram, system designer, projects, and design languages. In this course, you will follow a typical design flow to design an algorithm and define the system architecture. You will perform analysis and profiling and then convert a floating point algorithm to fixed point before compiling and deploying it to the FPGA. At the end of this course, you will have a working OFDM transceiver.
Course Objectives:
Use the NI Software Defined Radio platform for wireless prototyping using the LabVIEW Communications
Design and run algorithms on the processor using the LabVIEW G, MathScript and C languages
Design and run algorithms on the FPGA using the Multirate Diagram, FPGA IP, and Clock Driven Logic contexts
Implement data transfer and communications methods to exchange data between the processor and FPGA
Select the most appropriate language to begin your design based on algorithm requirements and structure
Quickly design new communications systems and/or evaluate new wireless algorithms using real-world signals
Course Information:
September 19-21, 2016
8:15 AM - 4:30 PM
Peak Technical Training Center
9939 Via Pasar
San Diego, CA 92126